Acquisition Fields; Trace Mode; Armed By - HP 1652B Getting Started Manual

Hide thumbs Also See for 1652B:

Table of Contents

The acquisition fields are comprised of the Trace mode, Armed by

Branches, Count, and Prestore fields, as shown below.

HP 1652B/1653B

Front-Panel Reference

IMCHINE 2 I-

Specification

' any state"

State Trace Acquisition Fields

You specify the mode in which the state analyzer will trace with the

field. You have two choices for trace mode: Single and

Repetitive. If you place the cursor on the field and press SELECT the

field toggles from one mode to the other.

Single Trace mode acquires data once per trace. Repetitive Trace

mode repeats single acquisitions until the STOP key on the front panel

is pressed, or if Stop measurement is on, until conditions specified with

the X and 0 markers in the State Listing menu are met.

If both analyzers are on, only one trace mode can be

specified. Specifying one trace mode for one analyzer sets the same

trace mode for the other analyzer.

field lets you specify how your state analyzer is to be

armed. The analyzer can be armed by the RUN key, the other analyzer,

the scope or an external instrument through the BNC Input port. Any

of these can tell the analyzer when to start capturing data.

State Trace Menu

Chapters

Table of Contents