HP 1652B Getting Started Manual page 318

Symbol
View Size The Symbol view size field lets you specify how many characters of the
symbol name will be displayed when the symbol is referenced in the
Timing Trace Specification menu and the Timing Waveforms menu.
Selecting this field gives you the following pop-up.
Figure
17-10.
Symbol View Size Pop-Up Menu
You can have the logic analyzer display from 3 to all
16
of the
characters in the symbol name. For more information see "Timing
Trace Specification Menu" in Chapter
18
and the "Timing Waveforms
Menu" in Chapter
19.
Symbol Name
When you first access the Symbol Table, there are no symbols
specified. The symbol name field reads "New Symbol." If you select this
field, you will see an Alpha Entry pop-up menu on the display. Use the
pop-up menu and the keypad on the front panel to enter the name of
your symbol. A maximum of
16
characters can be used in a symbol
name. When you select the Done field in the Alpha Entry pop-up menu
the name that appears in the symbol name field is assigned and two
more fields appear in the display.
Timing Format Specification Menu
17-10
HP
1652Bl16538
Front-Panel Reference