Table of Contents
Advertisement
13
State Chart Menu
Introduction
The State Chart Menu allows you to build X-Y plots of label activity
using state data. The Y-axis always represents data values for a
specified label. You can select whether the X-axis represents states (ie.
rows in the State List) or the data values for another label. You can
scale both the axes to selectively view data of interest. An accumulate
mode is available that allows the chart display to build up over several
runs. When State is selected for the X-axis, X & 0 markers are
available which allows the current sample (state or time) relative to
trace point and the corresponding Y-axis data value to be displayed.
Marker placement is synchronized with the normal State Listing.
Accessing
the
The Chart menu is accessed from the State Listing menu. To access the
State Chart
Menu
Chart menu place the cursor on the field State
Listing
and press
SELECT. A pop-up appears with the following options:
l
State Listing.
0 State Waveforms.
l
State Chart.
0 State Compare.
Place the cursor on State Chart and press SELECT. The pop-up will
close and display the State Chart menu.
Selecting
the
Axes for the
Chart
When using the State Chart display, you first select what data you want
plotted on each axis. To assign the vertical axis label, position the
cursor on the Y-axis Label field in the menu. This is the field just to the
right of "XY
Chart
of Label". When selected, a pop up appears in which
you select one of the labels that were defined in the State Format
Specification Menu. The X-axis assignment field is just to the right of
"Versus",
and toggles between State and Label when selected. When
label is selected, a third field appears to the right of Label that pops up
when selected in which you select one of the defined state labels.
HP 16528/l 6538
State Chart Menu
Front-Panel Reference
13-l
Advertisement
Chapters
Table of Contents
