6. Now measure the falltime on CH 2. Select the Input field in the
Automatic Measurement listing pop-up and toggle to CH 2.
7. All readings in the Automatic Measurement listing pop-up are
now for CH2. Falltime is now being measured on CH.2.
VP-P
The peak-to-peak voltage measurement uses the maximum voltage and
Measurement
the minimum voltage values found in the data displayed on screen.
VP-P = Vmaximum - Vminimum
8. Notice the Vp_p measurement displayed in the Automatic
Measurements listing pop-up. This reading is for the channel
currently selected.
9. Select Done to exit the Automatic Measurements listing pop-up.
-
HP 16528/1653B
Front-Panel Reference
Waveforms Menu
257