Starting The Printout; Print Screen; Print All - HP 1652B Getting Started Manual

Starting the
Printout
Print All
Note
HP
16526/16538
Making Hardcopy Prints
Front-Panel Reference
7-7
If you want just what is on screen, start the printout with the Print
Screen option. If you want all the data, use the Print All option. Both
options are in the I/O menu. Once you decide which option to use, start
the printout bv placinn the cursor on the print option (screen or all)
andbressing S&C+.
When you are ready to print, you need to know whether there is more
data than is displayed on screen. In cases where data is off screen (i.e.,
format specifications with all pods assigned to a single analyzer), you
need to decide whether you want just the data that is on screen or all
the data.
7
I/O MENU
l
Done
0 Print Screen
0 Print All
l
Disk Operations
0 I/O Port Configuration
l
External BNC Configuration
0 Self tests
Figure 7 - 4. I/O Menu
.
The Print Screen option prints only what is displayed on screen at the
time you initiate the printout. In the Print Screen mode, the printer
uses its graphics capabilities and the printout will look just like the
logic analyzer screen with only one exception: the cursor will not print.
The Print All option prints not only what is displayed on screen,
but also what is below, and, in the Format Specification, what is to the
right of the screen at the time you initiate the printout.
Make sure the first line you wish to print is at the top of the screen
when you select Print All. Lines above the screen will not print.