Anaiyzer Data Acquisition Self Test - HP 1652B Getting Started Manual

3 .
4.
Move the cursor to the Start self test field with the front panel knob and
press SELECT. After loading the self tests, the HP 1652B/l653B Self Tests
menu will display the following:
Untested * Analyzer Data Acquisition
Untested * Scope Data Acquisition
Untested * RS-232-C
Untested * BNC
Untested * Keyboard
Untested * RAM
Untested
* ROM
Untested * Disk Drive
* Cycle through tests
To select a self test, move the cursor to the appropriate test with the front
panel knob and press SELECT. To leave the HP 1652B/1653B Self Tests
menu, move the cursor to Done and press SELECT. The HP 1652B/1653B
will reload the operating system from the disk and display the default System
Configuration menu.
I
Note m
The operating system disk (or copy of it) must be in disk drive to reload the
operating system after leaving the Self Tests menu.
Analyzer Data
Acquisition
Self Test
The Analyzer Data Acquisition self test verifies the functionality of key elements of
the internal acquisition system.
1.
2.
3 .
4.
In HP 1652Bl1653B Self Tests menu, move the cursor to Analyzer Data
Acquisition and press SELECT. A menu will appear with a description of
the test, the number of "runs" and "failures" for the selected test, and fields to
select Single test, Repetitive test, or Done.
Move the cursor to Single test or Repetitive test and press SELECT. The
message "Running Data Acquisition Test" appears on screen while the
instrument is performing the test. When the test is finished, the message
"Data Acquisition Test complete" will appear on screen.
If you are running repetitive tests, press the front-panel STOP key when you
want to discontinue the test. The number of runs and failures will be
displayed in the menu.
To return to HP 1652B/1653B Self Tests menu, move the cursor to Done and
press SELECT.
HP 16528/1653B
Service Manual
Self
Tests
6B-3