Selecting A Waveform - HP 1652B Getting Started Manual

Selecting a
Waveform
You can display up to 24 waveforms on screen at one time. Each
waveform is a representation of a predefined label. To select a
waveform, place the cursor on a label name on the left side of the
disDlay and press SELECT. A pop-up appears in which you:
Insert waveforms.
Turn on waveforms.
Modify waveforms (waveform labels).
Turn off waveforms.
Delete waveforms.
Just to the right of each label name is a two-digit number or the word
"all." The number indicates which bit of the label the waveform
represents; or, all the bits of the label when "all" is displayed (see figure
14-1).
State Waveforms Menu
HP 16528/1653B
14-2
Front-Panel Reference
m]- [State lmvsforms 1
tlarkors
(1 Find [x-psttrrnlfrom 1 Trlggcr 1
Mcumulato [orrl
Ststor/Div
1
001s~ IT]
Figure
14-l.
State Waveforms Menu
In the above figure, label A has "all" specified displaying all the bits
overlaid in a single waveform. Label B however, has seven of its bits
displayed individually (bits 0 through 6).