HP 1652B Getting Started Manual page 99

Logic
Hide thumbs Also See for 1652B:
Table of Contents

Advertisement

/-'
Probing
2
-
Introduction
This chapter contains a description of the probing system of the
HP
1652B/l653B
logic analyzers.
It
also contains the information you need
for connecting the probe system components to each other, to the logic
analyzer and oscilloscope, and to the system under test.
Probing
You can
connect the
HP 1652B/l653B
logic analyzers to your system
Options
under test in one of the following ways:
l
HP 1032OC User-Definable Interface (optional).
l
HP 10269C
with
microprocessor specific modules (optional).
l
The standard
HP 1652B/53B
prob&s (general purpose probing.)
l
Direct connection to a 200pin 3M
Series type header connector
using the optional termination adapter (HP part number
01650-63201).
The HP 1032OC
The optional HP 1O32OC User-Definable Interface module combined
User-Definable
with the optional HP 10269C General Purpose Probe Interface allows
Interface
Y
ou
to connect the HP
1652B/1653B
logic analyzers to the
microprocessor in your target system. The HP 1032OC includes a
breadboard (HP 64651B) which you custom wire for your system.
Another option for use with the HP 1032OC is the HP 1032lA
Microprocessor Interface Kit. This kit includes sockets, bypass
capacitors and a fuse for power distribution. Also included are
wire-wrap headers to simplify wiring of your interface when you need
active devices to support the connection requirements of your system.
You will find additional information about the HP 1032OC and HP
1032lA in the
Accessories for HP Logic Anal'en
data sheet.
. HP 16528/1653B
Front-Panel Reference
Probing
2-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

1653b

Table of Contents