Table of Contents
Advertisement
The HP 10269C
Instead of connecting the analyzer probe tips directly to the signal
General Purpose
lines, you may use the optional HP 10269C General Purpose Probe
Probe Interface
Interface. The HP 10269C allows you to connect the probe cables,
without the probes, to connectors on the interface. When the
appropriate preprocessor is installed in the interface, you will have a
direct connection between the logic analyzer and the microprocessor
under test. See figure 2-l for a basic block diagram.
There are a number of microprocessor specific preprocessors available
as optional accessories which are listed in the
Accessories for HP Logic
Analjzem
data sheet. Appendix A of this manual also introduces you to
preprocessors and inverse assemblers.
HP 16528
Pod
1
HP10269C
HP 1653B
PREPROCESSOR
Pod 2
Pod
3+
Pod
4*
Pod
5*
pPROCESSOR
L-
01650831
+ Not
available
on HP16538
Figure
2-1.
HP
10269C
with Preprocessor
Probing
2-2
HP 1652B/l653B
Advertisement
Chapters
Table of Contents
