Waveform Selection - HP 1652B Getting Started Manual

Waveform
Selection
This section will show you how to insert, modify, and delete input
channels on the waveform display and how to perform waveform math
and overlay functions. Any of these operations can be performed from
any of the oscilloscope main menus.
--
The channel label fields to the left of the waveform display shows the
input channels that are being displayed. Figure 23-6 shows the default
setting which displays CH
1
and CH 2 selected.
Channel Menu HP 1652B/1653B
23-6
Front-Panel Reference
IJ- Channel
(fiutoscale)
Input
ProbE
6/0lv
pi--q
1101
/--iEGq
V/DLV
r--Txrq
1
Impedance L 1 HOhm ]
Ottset
Preset
[2.500 v]
I
Figure
23-6.
Channel Label Fields