The Cursor; How To Select Menus - HP 1652B Getting Started Manual

,-
0
6
._ . .
HP-IB Inte~ce
Connector. Standard HP-II3 connector for connecting
an HP-IB printer or controller.
0 7
Fan. Provides cooling for the logic analyzer. Make sure air is not
restricted from the fan and rear-panel openings.
0 8
Probe Compensation Signal Output. Provides a signal for probe
compensation adjustment.
The Cursor
The cursor (inverse video) highlights interactive fields within the menus
that you want to use. Interactive fields are enclosed in boxes in each
menu. When you rotate the KNOB, the cursor moves from one field to
another.
How to Select
Menus
You select the main menus by pressing the appropriate menu key. The
main menu keys are:
l
FORMATKHAN
l
TRACE/TRIG
l
DISPLAY
l I/o
When the menu is displayed, you can access fields within the menus.
The FORMAT/CHAN, TRACE/TRIG, and DISPLAY menu keys
provide access to their respective menus. If more than one analyzer
(machine) is on, or the oscilloscope is on, you see the selected menu of
either analyzer
1,
analyzer 2 or the oscilloscope depending on what
type menu was last displayed (analyzer or scope), or what you did in
the System Configuration menu. To switch from the machine 1 menu
set to machine 2 (same analyzer) menu set or the oscilloscope menu
set, select the desired analyzer or scope from the pop-up that appears
when the field in the upper left comer of the main menu is selected.
This pop-up is available in all main menus except the I/O menu.
The I/O menu differs from the other three main menus in that it is a
pop-up menu that appears on top of the currently displayed menu
when you press the I/O key.
HP 1652B/1653B
Using the Front-Panel User Interface
Front-Panel Reference
3-7