Table of Contents
Advertisement
When a pop-up menu appears, the cursor will be on the current option.
You use the KNOB to move the cursor to your desired option. Pressing
the SELECT key tells the logic analyzer this is the option you want.
This either automatically selects the option and closes the pop-up,
opens another pop-up, or changes options. If the pop-up doesn't
automatically close, it will contain the Done field. In this case you close
the pop-up by placing the cursor on Done and pressing SELECT.
0 11
Disk Drive. A 3.5 inch, double-sided, double density drive. Besides
loading the operating system, it allows you to store and load logic
analyzer configurations and inverse assembler files.
0 52
Disk Eject Button. Press this button to eject a flexible disk from the
disk drive.
0 I3
Indicator Light. This light is illuminated when the disk drive is
.
operating. Wait until this light is out before removing or inserting disks.
0
14
Inputs 1 and 2. Two BNC connectors allow the connection of
oscilloscope probes and BNC cables for signal input to the oscilloscope.
-
-
HP 16528/1653B
Front-Panel Reference
Using the Front-Panel User Interface
3-5
Advertisement
Chapters
Table of Contents
