Otherpackaging; Cleaning Requirements - HP 1652B Getting Started Manual

Other
Packaging
The following general instructions should be followed for repacking the instrument
with commercially available materials.
Remove the disk from disk drive and install a yellow shipping disk.
Wrap the instrument in heavy paper or plastic.
Use a strong shipping container. A double-wall carton made of 350 lb. test
material is adequate.
Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inches) thick
around all sides of the instrument to provide firm cushioning and prevent
movement inside the container. Protect the control panel with cardboard.
Seal the shipping container securely.
Mark the shipping container FRAGILE to ensure careful handling.
In any correspondence, refer to the instrument by model number and serial
number.
Cleaning
Requirements
Use MILD SOAP AND WATER to clean the HP 1652B/1653B cabinet and front
panel. Care must be taken to not use a harsh soap which may damage the
water-base paint finish of the instrument.
--1
Installation HP 16528/1653B
2-10
Service Manual