Qualifier And Pattern Fields - HP 1652B Getting Started Manual

Qualifier and
Pattern Fields
State Trace Menu
HP
16528/1653B
lo-22
Front-Panel Reference
The qualifier and pattern fields appear at the bottom of the State Trace
Specification menu. They allow you to specify patterns for the
qualifiers that are used in the sequence levels.
-.
, piizq
Figure
W-29.
Qualifier and Pattern Fields
The Label fields display the labels that you specified in the State
Format Specifkation menu. The labels appear in the order that you
specified them; however, you can change the order. Select one of the
label fields and you will see a pop-up menu with all the labels. Decide
which label you want to appear in the label field and select that label.
The label that was there previously switches positions with the label you
selected from the pop-up.
The
base
fields allow you to specify the numeric base in which you want
to defke a pattern for a label. The base fields also let you use a symbol
that was specified in the State Symbol Table for the pattern. Each label
has its own base defined separately from the other labels. If you select
one of the base fields, you will see the following pop-up menu. Decide
which base you want to define your pattern in and select that option.
Binclr
Octal
Decimal
-B
Hexadecimal
ASCII
S mbol
Figure
10-30.
Numeric Base Pop-Up Menu