Storing To A Disk - HP 1652B Getting Started Manual

Storing to a
Disk
The Store operation allows you to store your configurations and data to
a file with a description of its contents. You must assign a file name for
each file in which you wish to store data.
Select the Store operation.
Disc Opnstlons
CEED
store
] to film -1
Flla
errcrlptton
[[(@Kiiiq
l DRRflfEST 16SD/l.COlIf AD TINXlc OfIS 0
ttIXEDDEflD lbSO/l,conf I g HIXED MODE DEtlD
Figure 6-7. The Store Operation
To name your ffie, place the cursor on the field to the right of "to file"
and press SELECT. The Alpha Entry pop-up appears.
Enter a filename that starts with a letter and contains up to ten
characters. It can be any combination of letters and numbers, but there
can be no blank spaces between any of the characters.
Entering a file description is the same process as naming a file except
you can enter up to 32 characters, start the description with a number,
and enter spaces between characters.
Note
The field for "file description" makes it easier to identify the type of
data in each file. This is for your convenience but you can leave this
field blank.
HP 1652B/l653B
Disk Drive Operations
Front-Panel Reference
&9