Accessing The Compare Menu; The Compare And Difference Listing Displays; The Compare Listing; The Difference Listing - HP 1652B Getting Started Manual

Accessing the
The Compare menu is accessed from the State Listing menu. To
Compare Menu
access the Compare menu place the cursor on the field State Listing
and press SELECT. A pop-up appears with the following options:
0 State Listing
0 State Waveforms
l
State Chart
0 State Compare
Place
the
cursor on State
Compare
and press SELECT. The pop-up
will close and display the State Compare menu.
The Compare
and Difference
Listing Displays
The Compare
Listing
The Difference
Listing
Two menus (or displays) in addition to the normal State Listing, are
available for making comparison measurements: the Compare Listing
and the Difference Listing.
The Compare Listing contains the image (or template) that acquired
data is compared to during a comparison measurement. The
boundaries of the image (or size of the template) can be controlled by
using the channel masking and compare range functions described
below. Any bits inside the image displayed as "X" have been set to don't
compare bits.
The Difference Listing highhghts the entire row with inverse video, if
any, in the acquired data that differs from those in the compare image.
In addition, when the base is hexadecimal, octal, or binary, the bit (or
digit containing the bit) that differs from the compare image is
underlined (see figures 12-2 and 12-3). If the base is inverse assembled
symbols, the display does not change; however, the stop measurement
functions still function.
To display the Compare Listing or the Difference Listing, place the
cursor on the field directly to the right of Show in the upper left part of
the display and press SELECT.
The
field
will
toggle between
Compare
Listing
and
Difference Listing.
State Compare Menu
12-2
HP 16528/1653B
Front-Panel Reference