Time/Div (Time Per Division) Field - HP 1652B Getting Started Manual

The next field to the right of the At
Marker field will pop
when selected and show you all thelabels assigned to the timing
up
analyzer as shown below.
.
pijzEmq-
liming Wavelams
I
Figure 1940. Label Option Pop-up
Time/Div (time
per division)
Field
Note d
The time per division field allows YOU to change the width of the time
window of the Timing Waveformsmenu.
When the pop-up is open you can change the time per division by
rotating the KNOB or entering a numeric value from the keypad. When
you rotate the KNOB, the time per division increments or decrements
in
l-2-5
sequence from
10
ns/div to 50 ms/div.
Sample period is fixed at
10
ns in the Transitional acquisition mode.
When you enter a value from the keypad, the time per division does not
have to be a
l-2-5
sequence.
Note I&
In Glitch mode, changing the Time/Div setting changes the sample
period for the next run. To view the sample period after the next run,
turn the markers off if they are on and press RUN.
Timing Waveforms Menu
19-8
HP 16528/1653B
Front-Panel Reference