Introduction; Accessing The I/O Menu ,511 - HP 1652B Getting Started Manual

-
I/O Menu
5
Introduction
This chapter describes the I/O and pop-up menus that you will use on
your logic analyzer. The purpose and functions of each menu are
explained in detail, and we have included many illustrations and
examples to make the explanations clearer.
The I/O menu allows you to perform I/O tasks with your logic analyzer.
The tasks you can do with this menu areas follows:
0 Print screens.
l
Perform disk operations.
0 Configure the HP-II3 Interface.
l
Configure the RS-232C Interface.
l
Enable the analyzer to perform external triggering.
l
Run self tests on the analyzer.
Accessing the
You can access the I/O menu from any other menu in the system by
I/O Menu
pressing the I/O key on the front panel. Use the KNOB to roll the
cursor through the menu. When the cursor is positioned over the
option you desire, press SELECT. It lists the following options:
a Done
0 Print Screen
0 PrintAll
l
Disk Operations
0 I/O Port Configuration
l
External BNC Configuration
l Self Test
To exit the I/O menu, position the cursor over the Done option and
press SELECT. This returns you to the menu you were in before you
pressed the I/O key.
HP 16528/1653B I/O Menu
Front-Panel Reference
51