State Waveforms Menu; Introduction; Accessing The State Waveforms Menu - HP 1652B Getting Started Manual

14
- State Waveforms Menu
Introduction
The State Waveforms Menu allows you to view state data in the form of
waveforms identified by label name and bit number. Up to 24
waveforms can be displayed simultaneously. Only state data from the
current state machine can be displayed as waveforms in the State
Waveforms menu.
The presentation and user interface is generally the same as the Timing
Waveform menu, except the X-axis of the state waveform display
represents only samples, or states instead of time (seconds). This is
true regardless of whether Count (in the State Trace menu) is set to
Time or Off. As a result, the horizontal axis of the display is scaled by
States/Div and Delay in terms of samples from trigger. Marker features
are the same as for State List in that Time or States will only be
available when Count is set to Time or States. The Sample Rate display
is not available in State Waveform even when markers are off.
Accessing the
The State Waveforms menu is accessed from the State Listing menu.
State Waveforms
To access the State Waveforms menu place the cursor on the State
Menu
Listing field and press SELECT. A pop-up appears with the following
options:
a State Listing.
a State Waveforms.
l
State Chart.
0 State Compare.
Place the cursor on State Waveforms and press SELECT. The pop-up
will close and display the State Waveforms menu.
HP 16528/1653B
State Waveforms Menu
Front-Panel Reference
14-l