Table of Contents
Advertisement
Waveform Output by Compare Match: In 16-bit timer channels 0, 1 compare match A or B can
cause the output at the TIOCA or TIOCB pin to go to 0, go to 1, or toggle. In channel 2 the output
can only go to 0 or go to 1.
• Sample setup procedure for waveform output by compare match
Figure 8.17 shows an example of the setup procedure for waveform output by compare match.
Output setup
Select waveform
output mode
Set output timing
Start counter
Waveform output
Figure 8.17 Setup Procedure for Waveform Output by Compare Match (Example)
1.
Select the compare match output mode (0, 1, or
toggle) in TIOR. When a waveform output mode
is selected, the pin switches from its generic input/
output function to the output compare function
(TIOCA or TIOCB). An output compare pin outputs
1
the value set in TOLR until the first compare match
occurs.
2
2.
Set a value in GRA or GRB to designate the
compare match timing.
3
3.
Set the STR bit to 1 in TSTR to start the timer
counter.
255
Advertisement
Table of Contents
