Vcl Pin; Figure 1.6 H8/3062F-Ztat B-Mask Version, H8/3064F-Ztat B-Mask Version, And On-Chip Mask Rom B-Mask Versions - Hitachi H8/3062 Hardware Manual

1.5.3 V Pin
CL
The H8/3064F-ZTAT B-mask version, H8/3062F-ZTAT B-mask version, and on-chip mask ROM
B-mask versions have a V
stabilization capacitor must be connected.
The method of connecting the external capacitor is shown in figure 1.6.
Do not connect the V
pins as usual). Note that the V
H8/3062F-ZTAT R-mask version and on-chip mask ROM versions.
External
capacitor
V
CL
0.1 µF
H8/3062F-ZTAT,
H8/3062F-ZTAT B-mask version,
H8/3064F-ZTAT B-mask version,
H8/3064 mask ROM B-mask version,
H8/3062 mask ROM B-mask version,
H8/3061 mask ROM B-mask version,
H8/3060 mask ROM B-mask version
(5 V model)
Do not connect the V
V pin (Connect the V
CL
other V pins as usual).
CC
Place the capacitor close to the pin.
Figure 1.6 H8/3062F-ZTAT B-Mask Version, H8/3064F-ZTAT B-Mask Version, and
26
(internal step-down) pin, to which a 0.1 µF internal voltage
CL
power supply to the V
CC
output pin occupies the same location as a V
CL
power supply to the
CC
power supply to
CC
On-Chip Mask ROM B-Mask Versions
pin (Connect the V
CL
V power
CC
supply
These versions have a V
pin in the same pin position as a V
the H8/3062F-ZTAT B-mask version and
H8/3064F-ZTAT B-mask version.
power supply to other V
CC
pin in the
CC
V
CC
H8/3062F-ZTAT R-mask
version,
H8/3062 mask ROM version,
H8/3061 mask ROM version,
H8/3060 mask ROM version
power supply
CC
CC
pin in
CC