Hitachi H8/3062 Hardware Manual page 533

Bit 3—Erase-Verify Mode (EV) *
the SWE, ESU, PSU, PV, E, or P bit at the same time).
Bit 3
EV Description
0 Erase-verify mode cleared
1 Transition to erase-verify mode
[Setting condition]
When FWE = 1 and SWE = 1
Bit 2—Program-Verify Mode (PV) *
not set the SWE, ESU, PSU, EV, E, or P bit at the same time).
Bit 2
PV Description
0 Program-verify mode cleared
1 Transition to program-verify mode
[Setting condition]
When FWE = 1 and SWE = 1
Bit 1—Erase Mode (E) *
PSU, EV, PV, or P bit at the same time).
Bit 1
E Description
0 Erase mode cleared
1 Transition to erase mode
[Setting condition]
When FWE = 1, SWE = 1, and ESU = 1
Bit 0—Program 1 (P) *
ESU, PSU, EV, PV, or E bit at the same time).
Bit 0
P Description
0 Program mode cleared
1 Transition to program mode
[Setting condition]
When FWE = 1, SWE = 1, and PSU = 1
1
: Selects erase-verify mode transition or clearing (Do not set
1
: Selects program-verify mode transition or clearing (Do
1 3
*
: Selects erase mode transition or clearing (Do not set the SWE, ESU,
1 3
*
: Selects program mode transition or clearing (Do not set the SWE,
(Initial value)
(Initial value)
(Initial value)
(Initial value)
485