18.10
Flash Memory PROM Mode
The H8/3064F-ZTAT B-mask version have a PROM mode as well as the on-board programming
modes for programming and erasing flash memory. In PROM mode, the on-chip ROM can be
freely programmed using a general-purpose PROM writer that supports the Hitachi
microcomputer device type with 256-kbyte on-chip flash memory.
18.10.1 Socket Adapters and Memory Map
In PROM mode using a PROM writer, memory reading (verification) and writing and flash
memory initialization (total erasure) can be performed. For these operations, a special socket
adapter is mounted in the PROM writer. The socket adapter product codes are given in table
18.11. In the H8/3064F-ZTAT B-mask version PROM mode, only the socket adapters shown in
this table should be used.
Table 18.11
H8/3064F-ZTAT B-Mask Version Socket Adapter Product Codes
Product Code
Package
HD64F3064BF
100-pin QFP (FP-100B)
HD64F3064BTE 100-pin TQFP (TFP-100B)
HD64F3064BFP 100-pin QFP (FP-100A)
HD64F3064BF
100-pin QFP (FP-100B)
HD64F3064BTE 100-pin TQFP (TFP-100B)
HD64F3064BFP 100-pin QFP (FP-100A)
Figure 18.15 shows the memory map in PROM mode.
H8/3064F-ZTAT
MCU mode
B-mask version
H'000000
On-chip ROM
H'03FFFF
Figure 18.15 Memory Map in PROM Mode
Socket Adapter
Product Code
ME3064ESHF1H
ME3064ESNF1H
ME3064ESFF1H
HF306BQ100D4001
HF306BT100D4001
HF306AQ100D4001
PROM mode
H'00000
H'3FFFF
Manufacturer
MINATO
ELECTRONICS INC.
DATA I/O JAPAN CO.
565