Milling Instruments; Overview Of Materials And Milling Instruments - Sirona CEREC MC XL Operating Instructions Manual

7 Maintenance

Milling instruments

40
7.2 Milling instruments
NOTICE
Second bur set
Second burr set
The following information on the two but sets is only applicable if the
second but set (optional) is also installed.
7.2.1

Overview of materials and milling instruments

The following table shows the two pairs of milling instruments, the positions
where they must be inserted and the materials that can be milled with each
instrument pair:
Milling instrument Milling instrument
"Left" "Right"
"Step Bur 12 S" "Cyl. Pointed Bur 12 S"
"Step Bur 20" "Cyl. Pointed Bur 20"
If you primarily process materials from one of the two groups, equip both bur
sets with the same pair of milling instruments.
Sirona Dental Systems GmbH
Operating Instructions CEREC MC XL
Material
CEREC Blocs
CEREC Blocs PC
VITA MARK II
VITA ESTHETIC LINE
VITA TriLuxe Forte
VITA TriLuxe
IVOCLAR VIVADENT
IPS Empress CAD
IVOCLAR VIVADENT
IPS Empress CAD Multi
IVOCLAR VIVADENT
IPS e.max CAD
VITA In-Ceram
ZIRCONIA
VITA In-Ceram
ALUMINA
VITA In-Ceram SPINELL
Merz artegral imCrown
Sirona inCoris ZI
Sirona inCoris AL
VITA In-Ceram YZ
VITA In-Ceram AL
IVOCLAR VIVADENT
IPS e.max ZirCAD
CAD-Waxx
61 46 885 D 3439
D 3439.201.02.11.02 10.2009