Purge/Auto Purge Function (Purging The Water Paths) - Sirona C2+ Cleaning And Care

Sirona Dental Systems GmbH
Care and cleaning instructions for the practice team C2
6.2

Purge/Auto Purge function (purging the water paths)

A
SELECT MODE SELECT MODE
PURGE / APURGE / SAN PURGE / APURGE / SAN
A
SELECT ITEMS SELECT ITEMS
FOR PURGING FOR PURGING
1 0.2 1
pm x 1000
59 58 512 D 3370
D 3370.103.01.13.02
+ +
, M1
1
1
–
+
max.
6.2 Purge/Auto Purge function (purging the water paths)
PURGE function
(only for dentist element)
The purge function enables you to flush the water paths.
To do this, press the quick setting key 1 (> 3 s) when
all instruments are in their holders.
You will be prompted to choose between PURGE/
APURGE and SANITATION
–
Select PURGE with the
On pressing quick setting key 1 briefly (< 3 s), the fol-
lowing prompt appears if all instruments are deposited in
their holders:
SELECT ITEMS FOR PURGING
Pick up the instruments you want to flush and hold them
above the cuspidor.
The maximum water flow must be set on the instru-
ments.
Press quick setting key 1 again (< 3 s)); the instru-
ments are then purged one after the other.
The purging time in seconds set previously in the Mode
dialog runs down for each instrument individually.
An audible signal sounds after the last instrument has
been flushed.
Finally place the instruments back
1. The SANITATION function is described in the instructions
"Care and Cleaning by the Practice Team".
6 Disinfection system
1
.
+
or key. PURGE must flash.
in their holders.
17