Instrument Identification; Instruments Covered By This Guide; Assembly-Level Service Guide Organization - Agilent Technologies 53150A Service Manual

In This Guide

Instrument Identification

The instrument is identified by the serial number on the rear panel.
Agilent uses a two-part serial number with the first part (prefix)
identifying a series of instruments and the second part (suffix) identifying
a particular instrument within a series. Agilent-assigned alpha characters
before the prefix identify the country in which the instrument was
manufactured.

Instruments Covered by this Guide

This guide applies directly to Agilent 53150A, 53151A, and 53152A
Counters that have the same serial number prefix(es) shown on the title
page. If the serial number prefix of your Counter differs from that listed
on the title page of this guide, there may be differences between this guide
and your instrument.
Instruments having a higher serial prefix are covered (when required) by
one or more manual-change sheets included with this guide. If a required
change sheet is missing, contact your nearest Agilent Sales Office listed at
the back of this guide.

Assembly-Level Service Guide Organization

This Assembly-Level Service Guide consists of a table of contents, a
preface, six chapters, and an index. The page headers identify the
chapters and sections of this manual. The chapter contents are
summarized as follows:
Chapter 1 Performance Tests provides procedures that verify the
Counter operates properly and meets the Agilent 53150A/151A/152A
specifications given in Chapter 6, "Specifications," in this guide.
Chapter 2 Service is divided into seven main sections that provide
instructions for returning the Counter to Agilent for service, calibrating
the Counter, and troubleshooting the assemblies in the Counter.
Chapter 3 Replacing Assemblies provides procedures for replacing
defective assemblies and/or modules in the Counter.
viii Assembly Level Service Guide