Using The Sample Capacity Extension With The Agilent Chemstation; Well-Plate Handler Configuration - Agilent Technologies 1200 Series User Manual

3 G2257A Software Navigation
Using the Sample Capacity Extension with the
Agilent ChemStation

Well-plate Handler Configuration

The Well-plate Handler is configured using the Well-plate Handler Configuration
dialog box, which is accessed from the Injector Configuration dialog box of the
high performance autosampler. To make the Well-plate Handler Configuration
dialog box accessible, you select Automation Interface in the Trays group of the
Injector Configuration dialog box; this activates a Well-plate Handler Config. button
(see
Figure 37
Clicking the Well-plate Handler Config. button displays the Well-plate Handler
Configuration dialog box, which contains all the parameters necessary for the
operation of the Well-plate Handler. The parameters are in four groups (see
Figure
60
Figure 37).
Injector Configuration dialog box, Trays group
38)
Agilent 1200 Series Sample Capacity Extension User Manual