Single Fold Position Adjustment - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

16 Appendix
9
Select [Name], and select [Change Settings].
10
Enter the type name, and then select [Save].
Note
11
Select the fold type, and then select [Change Settings].
For details on making each fold adjustment, refer to the following sections.

Single Fold Position Adjustment

Adjust the single fold position.
1
Select [Single Fold], and then select [Change
Settings].
2
Specify [Sheets to be folded], and then select
[Sample Printout].
3
Select the tray in which you loaded paper, and
press the <Start> button.
The sample is printed.
16
4
Select [Close].
5
Check the sample printout, measuring the misaligned amounts.
668
• We recommend you to use a name such as "Single Fold Plain" that allows you to know what the
content is.
- For single fold, refer to "Single Fold Position Adjustment" (P.668).
- For booklet, refer to "Booklet Position Adjustment" (P.669).
- For C fold, refer to "C Fold Position Adjustment" (P.671).
- For Z fold, refer to "Z Fold Position Adjustment" (P.672).
- For Z fold half sheet, refer to "Z Fold Half Sheet Position Adjustment" (P.673).