Table of Contents
Advertisement
Interface Cables
When connecting the machine directly to a computer, use either the USB interface or
parallel interface (optional). When connecting the machine to a network, use the
Ethernet interface.
Using the USB Interface
The USB interface of the machine supports USB 2.0.
This section describes the installation procedures for the USB interface.
1
Press the power switch to the [
2
Make sure that the touch screen is blank and the <Energy Saver> button does not
light up.
3
Open the front cover.
4
Press the main power switch to the [
5
Remove the rear right cover.
6
Connect the USB cable to the USB 2.0
interface connector.
7
Return the rear right cover to its original
position.
8
Connect the other end of the USB cable to the computer.
9
Press the main power switch to the [ | ] position to switch on the main power.
10
Close the front cover.
] position to switch off the power.
] position to switch off the main power.
Interface Cables
1
19
Advertisement
Chapters
Table of Contents
