CHAPTER 6 MAINTENANCE AND INSPECTION
4 Cleaning
4.1 Cleaning by the User (machine)
The user is expected to perform the following so that the machine may be used in its best
condition at all times.
4.1.1 Cleaning the Fixing Pressure Roller
If the faces or the backs of printed sheets show soiling in the form of black dots, clean the
fixing pressure roller as follows:
1) Place an A4 or larger sheet of plain paper in the manual feed tray.
2) Press the Additional Functions key, and hold down the Right Arrow key or the Left Ar-
row key until the LCD indicates '6. ADJUST/CLEAN'.
3) Press the OK key.
4) Check to make sure that the LCD indicates '1. ROLLER CLEANING', and press the
OK key. In response, the machine will start cleaning the fixing pressure roller.
It takes about 3 min before the paper is delivered to the delivery tray after
the cleaning of the fixing pressure roller is started.
Memo
4.1.2 Other Cleaning
If images tend to be soiled, advise the user to clean the following as needed.
No.
Part
1
Copyboard glass
2
Copyboard glass retainer
3
Vertical size plate
4
White plate
6-2
COPYRIGHT © 2002 CANON INC.
Instructions
Wipe it with a cloth moistened with water (and wrung well);
then, dry wipe it.
Wipe it with a cloth moistened with water (and wrung well);
then, dry wipe it.
Wipe it with a cloth moistened with water (and wrung well);
then, dry wipe it.
Wipe it with a cloth moistened with water (and wrung well);
then, dry wipe it.
T06-401-01
2000 2000 2000 2000
CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002