Module Stop Control Register D (Mstpcrd) - Hitachi H8S/2646 Hardware Manual

17.2.10 Module Stop Control Register D (MSTPCRD)

Bit 7
MSTPD7 MSTPD6
Initial value 1
Read/Write R/W
MSTPCRD is an 8-bit read/write register that performs module stop mode control.
When the MSTPD7 bit is set to 1, PWM timer operation is stopped at the end of the bus cycle, and
module stop mode is entered. For details, see section 22.5, Module Stop Mode.
MSTPCRD is initialized by a reset and in hardware standby mode. It is not initialized by a manual
reset or in software standby mode.
Bit 7—Module Stop (MSTPD7): Bit 7 specifies the PWM module stop mode.
Bit 7: MSTPD7 Description
0 PWM module stop mode is cleared
1 PWM module stop mode is set
6 5
—
1 undefined undefined undefined undefined undefined undefined
R/W —
4 3
— — —
— — —
2 1 0
— —
— —
(Initial value)
625