Download  Print this page

Stop Error Codes; Table 6-1 Stop Error Codes - Hitachi HF-BX1000 Instruction Manual

Industrial computer
Hide thumbs

Advertisement

6. TROUBLESHOOTING

6.3 STOP Error Codes

A STOP error code provides a summary of an error cause.
STOP error codes are displayed on a blue screen as well as embedded in a memory dump file.
Table 6-1 shows the error cause corresponding to a STOP error code and a message displayed
along with the STOP error code.
STOP
No.
Error code
1 0x00009221
2 0x00009222
3 Other than the
above (a code
that indicates
the error cause
in more detail)
(*) Only if "Memory dump" is selected for Action at timeout under Watchdog timer setting in the
RAS Setup window.

Table 6-1 STOP Error Codes

Contents of the STOP message
screen
Remote shutdown contact is
closed at startup. Check remote
shutdown contact.
(A short message that explains
the STOP error)
Error Cause
The remote
shutdown input
signal was
detected during
Windows®
startup.
Watchdog timer
(*)
timed out
Windows®
STOP error
6-16
Action
For information about
the cause of the remote
shutdown, ask the
system administrator or
maintenance personnel.
Ask the system
administrator or
maintenance personnel.
For information about a
Windows® STOP error,
refer to the Microsoft
Knowledge Base.

Advertisement

loading

  Related Manuals for Hitachi HF-BX1000

This manual is also suitable for:

Hf-bx1200