Hitachi H8S/2646 Hardware Manual page 790

Notes: *1 If the A/D converter is not used, do not leave the AV
a voltage between 4.5 V and 5.5 V to the AV
for instance. Set V
*2 Current dissipation values are for V
pins unloaded and the on-chip pull-up resistors in the off state.
*3 The values are for V
*4 I depends on V
CC
= 0.18 (mA/(MHz × V)) × V
I
CCmax
0.8 (mA) (at normal operation)
= 0.17 (mA/(MHz × V)) × V
I
CCmax
0.3 (mA) (at sleep)
758
≤ AV
.
ref CC
min = V
IH
≤ LPV
< 3.0 V, V
RAM CC
and f as follows:
CC
× f + 2.87 (mA/MHz) × f + 0.52 (mA/V) × V
CC
× f + 2.13 (mA/MHz) × f + 0.75 (mA/V) × V
CC
, V , and AV
CC ref
and V pins by connecting them to V
CC ref
– 0.5 V, V max = 0.5 V with all output
CC IL
× 0.9, and V
min = V
IH CC
pins open. Apply
SS
,
CC
max = 0.3 V.
IL
+
CC
+
CC