Chapter 21.Ssh Commands; Ip Ssh Port; Ip Ssh Server - Allied Telesis AT-8000S Cli Reference Manual

Allied Telesyn AT-8000S Switch
CLI Reference Guide

Chapter 21.SSH Commands

ip ssh port

The ip ssh port Global Configuration mode command specifies the port to be used by the SSH server. To return
to the default configuration, use the no form of this command.
Syntax
ip ssh port port-number
no ip ssh port
Parameters
•
port-number — Port number for use by the SSH server (Range: 1 - 65535).
Default Configuration
The default port number is 22.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the port to be used by the SSH server as 8080.
Console(config)# ip ssh port 8080

ip ssh server

The ip ssh server Global Configuration mode command enables the device to be configured from a SSH server.
To disable this function, use the no form of this command.
Syntax
ip ssh server
no ip ssh server
Default Configuration
Device configuration from a SSH server is enabled.
Command Mode
Global Configuration mode
Page 210