Chapter 2: Managing Switch
Item
Telnet Service
Apply
Disconnect
Item
SSH Service
Apply
86
The following table describes the items in Figure 66 on page 85.
Description
Click Enabled or Disabled to set remote access through the Telnet
Service function.
Click Apply to save the values and update the screen.
Click Disconnect to disable the current Telnet service.
The Telnet Information settings in the ensuing table are informational
only: Telnet Service and Current Telnet Sessions Count.
SSH
Secure Shell (SSH) is a protocol providing secure (encrypted)
management connection to a remote device.
To access this page, click Security > Applications > SSH.
Figure 67. Security > Applications > SSH
The following table describes the items in Figure 67.
Description
Click Enabled or Disabled to set up Ethernet encapsulation (remote
access) through the Secure Shell (SSH) function.
Click Apply to save the values and update the screen.
The SSH Information settings in the ensuing table are informational only:
SSH.
Table 63. TELNET
Table 64. SSH