Hcf Elevator Long/Short Cables - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.7.7 HCF Elevator Long/Short Cables
Parts List on PL 15.3
Removal
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Assembly (REP 2.7.5).
2. Remove the Front Cover to access the Long Cables only.
2. Remove the cover
Figure 1 Removing the Front Cover
3. Remove the Cables (Figure 2).
Reissue
DocuColor 12/DCCS50
WARNING
(Figure 1).
1. Remove the
Screws (4)
2. Slide the Pulley
Figure 2 Removing the Cable from the Drive Shaft.
4. Remove the Cables from the Front Pulley's
1/05
8a-17
3. Pull out the cables
1. Remove the screw
(Figure 3).
High Capacity Feeder
REP 2.7.7