Hcf Feed Clutch; Hcf Tar Sensor - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.8.41 HCF Feed Clutch
Parts List on PL 15.13
Removal
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Rear Cover (PL 15.10)
2. Remove the Feed Clutch (Figure 1).
1.Remove the KL-clip
3. Remove the Feed Clutch
Figure 1 Removing the Feed Clutch
Replacement
1. Reverse the above procedures to replace the Feed Clutch
High Capacity Feeder
REP 2.8.41, REP 2.8.42
WARNING
2. Disconnect P/J851
REP 2.8.42 HCF TAR Sensor
Parts List on PL 15.11
Removal
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Assembly
2. Remove the HCF Feeder Assembly
3. Remove the Feed Sensor
2. Remove Screws (2) and Bracket
Figure 1 Removing the Feed Sensor
Replacement
1. Reverse the above procedures to replace the Feed Sensor.
1/05
8a-26
manuals4you.com manuals4you.com
WARNING
(REP 2.7.5).
(REP 2.8.27).
(Figure 1).
1. Disconnect P/J-853
3. Remove the Sensor
DocuColor 12/DCCS50
Reissue