Cam Drive Shaft - Xerox DocuColor 12/DCCS50 Service Manual

REP 15.1.8 Cam Drive Shaft
Parts List on PL 18.7
Removal
To avoid personal injury or shock, disconnect the Finisher cable connector. Switch off
the machine power and disconnect the Machine Power Cord.
1. Remove the Decurler Door Assembly
2. Decurler Rear Cover (REP 15.3.13).
3. Decurler Top Cover (REP 15.3.12).
4. Decurler Inner Cover (REP 15.3.14).
5. Remove the Reflector and Cam (REP
6. Remove the Gear and Decurler Cam Clutch
1. Disconnect the connector from Clutch.
2. Remove E-clip.
3. Remove the Gear.
4. Remove the Decurler Cam Clutch.
5. Remove the E-clip.
6. Remove the Bearing.
Figure 1 Remove the Gear and Decurler Cam Clutch
7. Remove the Cam Drive Shaft (Figure
1. Remove the E-Clip.
Finisher/Sorter
REP 15.1.8
WARNING
(REP 15.3.4).
15.1.3).
(Figure 1).
2).
2. Remove the Gear.
3. Remove the Cam Drive Shaft.
Figure 2 Remove the Cam Drive Shaft
8. Remove the Bearing from the Shaft
1. Remove E-Clip
2. Remove Bearing.
1/05
8d-66
manuals4you.com manuals4you.com
(Figure 3).
DocuColor 12/DCCS50
Reissue