System Setup; Menu Overview; Changing The Display Language - Xerox 6110MFP/XN Service Documentation

System setup

Menu overview

The control panel provides access to various menus to set up the machine or use the machine's functions.
These menus can be accessed by pressing Menu. Refer to the following diagram. Menus available in
Fax, Copy, or Scan mode vary.

Changing the display language

To change the language that appears on the control panel, follow these steps:
1. Press Menu until System Setup appears on the bottom line of the display and press OK.
2. Press OK when Machine Setup appears.
3. Press the Scroll buttons until Language appears and press OK.
4. Press the Scroll buttons until the language you want appears and press OK.
5. Press Stop/Clear to return to Standby mode.