Hcf One-Way Feed/Gear Clutch; Hcf Friction Clutch - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.8.39 HCF One-Way Feed/Gear Clutch
Parts List on PL 15.14
Removal
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Paper Tray Assembly
2. Remove the HCF Feeder Assembly
3. Remove the One-Way Feed/Gear Clutch
1. Remove the Front Chute
4. Remove the Feed and
Gear Clutch
Figure 1 Removing the Feed/Gear Clutch
Replacement
1. Reverse the above procedures to replace the One-Way Feed/Gear Clutch.
Reissue
DocuColor 12/DCCS50
WARNING
(REP 2.7.5).
(REP 2.8.27).
(Figure 1).
2. Push the Lock Tab and slide
the Feed Roll off shaft
3. Remove the C-clip and Gear
REP 2.8.40 HCF Friction Clutch
Parts List on PL 15.15
Removal
To avoid electrical shock, switch-OFF the Main Power Switch and disconnect the Power
Cord.
1. Remove the HCF Paper Tray Assembly
2. Remove the Friction Clutch (Figure
3. Remove the Friction Clutch
Figure 1 Removing the Friction Clutch
Replacement
1. Reverse the above procedures to replace the Friction Clutch.
1/05
8a-25
WARNING
(REP 2.7.5).
1).
2. Remove the Spacer
1. Push the Release
Tab and slide the
Retard Roll off shaft
High Capacity Feeder
REP 2.8.39, REP 2.8.40