Decurler; Decurler Rolls 1 And 2 - Xerox DocuColor 12/DCCS50 Service Manual

REP 15.1.1 Decurler
Parts List on PL 18.4
Removal
To avoid personal injury or shock, disconnect the Finisher cable connector. Switch off
the machine power and disconnect the Machine Power Cord.
1. Remove the Decurler Door Assembly
2. Remove the Decurler Rear Cover (REP
3. Remove the Decurler Inner Cover (REP
4. Remove the Decurler Top Cover (REP
5. Remove the Decurler (Figure 1).
1. Remove the screws (2).
2. Remove the screws (2).
3. Remove the Decurler.
Figure 1 Remove the Decurler
Replacement
Reinstall the Decurler in the reverse order of disassembly.
Reissue
DocuColor 12/DCCS50
WARNING
(REP 15.3.4).
15.3.13).
15.3.14).
15.3.12).
REP 15.1.2 Decurler Rolls 1 and 2
Parts List on PL 18.7
Removal
To avoid personal injury or shock, disconnect the Finisher Cable Connector. Switch off
the machine power and disconnect the Machine Power Cord.
1. Remove the Decurler Door Assembly
2. Remove the Decurler Rear Cover
3. Remove the Decurler Inner Cover
4. Remove the Decurler Top Cover
5. Remove the bearings (Figure
1. Remove shouldered screws (2).
2. Remove the E-clips (2).
3. Remove the bearings (2).
Figure 1 Remove the Bearings
6. Remove the bearings (Figure
1. Remove the screws (2).
2. Remove the E-clips (2).
3. Remove the bearings (2).
1/05
8d-59
WARNING
(REP 15.3.4).
(REP 15.3.13).
(REP 15.3.14).
(REP 15.3.12).
1).
2).
REP 15.1.1, REP 15.1.2
Finisher/Sorter