Bin 5 Full Stack Rap; Bin 6 Full Stack Rap - Xerox DocuColor 12/DCCS50 Service Manual

11-915 Bin 5 Full Stack RAP

The Control Logic detected that Bin 5 is full.
Initial Actions
• Refer to BSD12.9 for the following procedure.
• Ensure that Bin 5 is empty
Procedure
Enter dC330 012-285 Bin 5 Full Sensor. Press Start. Manually move the actuator in and out of
the sensor The display Changes from H to L to H as the actuator is moved in and out of
the sensor.
Y N
Press Stop. +5VDC is measured between P/J1002-5 and DC COM on the Mailbox
PWB.
Y N
+5VDC is measured between P/J1031-7 and DC COM on the Finisher PWB.
Y N
Replace the Finisher PWB
Go to Flag 5 on BSD12.9 and check the wires for an open circuit.
Replace the Mailbox PWB (PL 18.11).
Check the Bin 5 Full Sensor for intermittent operation. If the problem continues, replace the
Mailbox PWB (PL 18.11).
Reissue
DocuColor 12/DCCS50
(PL 18.4).

11-916 Bin 6 Full Stack RAP

The Control Logic detected that Bin 6 is full.
Initial Actions
• Refer to BSD12.9 for the following procedure.
• Ensure that Bin 6 is empty
Procedure
Enter dC330 012-286 Bin 6 Full Sensor. Press Start. Manually move the actuator in and out of
the sensor The display Changes from H to L to H as the actuator is moved in and out of
the sensor.
Y N
Press Stop. +5VDC is measured between P/J1002-6 and DC COM on the Mailbox
PWB.
Y N
+5VDC is measured between P/J1031-6 and DC COM on the Finisher PWB.
Y N
Replace the Finisher PWB
Go to Flag 6 on BSD12.9 and check the wires for an open circuit.
Replace the Mailbox PWB (PL
Check the Bin 6 Full Sensor for intermittent operation. If the problem continues, replace the
Mailbox PWB (PL 18.11).
1/05
11-915 Bin 5 Full Stack RAP, 11-916 Bin 6 Full Stack
8d-29
(PL 18.4).
18.11).
Finisher/Sorter