Decurler Drive Roll 1 - Xerox DocuColor 12/DCCS50 Service Manual

REP 15.1.11 Decurler Drive Roll 1
Parts List on PL 18.8
Removal
To avoid personal injury or shock, disconnect the Finisher cable connector. Switch off
the machine power and disconnect the Machine Power Cord.
1. Remove the Decurler Door (REP 15.3.4).
2. Remove the Decurler Top Cover (REP
3. Remove the Decurler Inner Cover (REP
4. Remove the Decurler Rear Cover (REP
5. Remove the Reflector and Cam (REP
6. Remove the Front Lever (PL 18.7).
7. Remove the Bearing from the roll at the front of the Finisher
1. Remove the E-Clip.
2. Remove the Bearing.
Figure 1 Remove the Bearing
8. Remove the Decurler Drive Roll 1 at the rear of the Finisher
1. Disengage the Drive Roll from the frame.
2. Remove the E-Clip.
3. Remove the gear.
4. Remove the bearing and then remove the Drive Roll.
Reissue
DocuColor 12/DCCS50
WARNING
15.3.12).
15.3.14).
15.3.13).
15.1.3).
(Figure 1).
(Figure 2).
Figure 2 Remove the Decurler Drive Roll 1
Replacement
Reinstall the Decurler Drive Roll 1 in the reverse order of disassembly.
1/05
8d-69
Finisher/Sorter
REP 15.1.11