Docking Interlock Switch; Decurler Door Interlock Switch - Xerox DocuColor 12/DCCS50 Service Manual

REP 15.3.23 Docking Interlock Switch
Parts List on PL 18.6
Removal
To avoid personal injury or shock, disconnect the Finisher cable connector. Switch off
the machine power and disconnect the machine Power Cord.
1. Switch off the printer power and disconnect the AC Power Cord.
2. Move the Finisher away from the printer until the Finisher stops.
3. Remove the Decurler Top Cover (REP
4. Remove the Decurler Rear Cover (REP
5. Remove the appropriate Docking Interlock Switch
1. Disconnect the Docking Switch Connector,
2. Remove the four screws securing the Entrance Lower Chute.
3. Disengage the switch harness from the harness clamps.
4. Remove the two screws to remove the appropriate Docking Interlock Switch.
Replacement
1. Reinstall the Docking Interlock Switch in the reverse order of removal.
Figure 1 Remove the Docking Interlock Switches
Reissue
DocuColor 12/DCCS50
WARNING
15.3.12).
15.3.13).
(Figure 1).
P/J664 or P/J665.
REP 15.3.25 Decurler Door Interlock Switch
Parts List on PL 18.5
Removal
To avoid personal injury or shock, disconnect the Finisher cable connector. Switch off
the machine power and disconnect the machine Power Cord.
1. Switch off the printer power and disconnect the AC Power Cord.
2. Remove the Decurler Top Cover
3. Remove the Decurler Inner Cover
4. Remove the Decurler Door Interlock Switch
1. Disconnect the connector, then push in the tabs to remove the Decurler Door Inter-
lock Switch from the Decurler Inner Cover.
Replacement
1. Reinstall the Decurler Door Interlock Switch in the reverse order of removal.
Figure 1 Remove the Decurler Door Interlock Switch
1/05
8d-125
WARNING
(REP 15.3.12).
(REP 15.3.14).
(Figure 1).
REP 15.3.23, REP 15.3.25
Finisher/Sorter