Using A Headset; Making And Receiving Calls Using A Headset; Redial - Mitel 6905 User Manual

M C
AKING ALLS

USING A HEADSET

The 6905 SIP Phone accepts analog headsets through the handset jack RJ11 located on the back of the
phone. Contact your telephone equipment retailer or distributor to purchase a compatible headset.
: Customers should read and observe all safety recommendations contained in headset operating
NOTE
guides when using any headset.

MAKING AND RECEIVING CALLS USING A HEADSET

Turn the phone over and locate the handset jack marked
1.
Insert the headset cord into the jack until it clicks into place.
: See the Mitel 6905 SIP IP Phone Installation Guide for more information.
NOTE
Press the
2.
Press the
3.

Redial

: Redial List information in this User Guide describes the phone's native Redial List. In some envi-
NOTE
ronments, the Redial List key may bring up a Redial List provided by the call manager; therefore,
depending on your call manager, the Redial List on your phone may function and behave differently then
what is documented in this User Guide. If this is the case, contact your System Administrator for more
information regarding your specific Redial List.
The Redial List stores information for up to the last 100 numbers you called. Your phone logs the
name/number of the called party, when you called, and the line used. You can view, scroll, and delete line
items in the Redial List from the IP phone UI as wells as copy selected entries to the Local Directory. You
can also dial out directly using a displayed entry in the Redial List.
key to obtain a dial tone or to answer an incoming call.
key to end the call.
USING A HEADSET
.
79