Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 6

•
•
•
Finally, there is a chapter that contains programming examples:
•
Mixed-Signal
Because both the "analog channels only" oscilloscopes (DSO models) and
Oscilloscope the mixed- signal oscilloscopes (MSO models) have analog channels, topics
Channel
that describe analog channels refer to all oscilloscope models. Whenever a
Differences topic describes digital channels, that information applies only to the
mixed- signal oscilloscope models.
See Also
• For more information on using the SICL, VISA, and VISA COM libraries
• For information on controller PC interface configuration, see the
• For information on oscilloscope front- panel operation, see the User's
• For detailed connectivity information, refer to the Agilent Technologies
• For the latest versions of this and other manuals, see:
6
Chapter 37, "Status Reporting," starting on page 1105, describes the
oscilloscope's status registers and how to check the status of the
instrument.
Chapter 38, "Synchronizing Acquisitions," starting on page 1127,
describes how to wait for acquisitions to complete before querying
measurement results or performing other operations with the captured
data.
Chapter 39, "More About Oscilloscope Commands," starting on page
1137, contains additional information about oscilloscope programming
commands.
Chapter 40, "Programming Examples," starting on page 1147.
in general, see the documentation that comes with the Agilent IO
Libraries Suite.
documentation for the interface card used (for example, the Agilent
82350B GPIB interface).
Guide.
USB/LAN/GPIB Connectivity Guide. For a printable electronic copy of
the Connectivity Guide, direct your Web browser to
and search for "Connectivity Guide".
"http://www.agilent.com/find/3000X- Series- manual"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
"www.agilent.com"