6.9.2 Tool—UM Data Backup—Scheduled Backup
•
Delete After Backup: Specify to delete messages that have been backed up from the mailbox.
•
Message Type: Specify to back up all messages, or only messages marked as "old".
Note
An invalid combination of these settings may prevent a backup from occurring. For example, if a
mailbox is full, but there are no messages older than the number of days specified in Retention
Days, or no messages are marked as "old", the backup will not be performed.
10.
In System Backup, select USB Flash Drive (Main Unit) or NAS, and then specify the folder on the
selected device where you want to save the system backup file.
11.
Click OK.
12.
In Status, select Enable and click OK.
Note
•
Up to 20 backup events can be scheduled.
•
If a backup is scheduled, but a USB memory device is not connected to the PBX at the time of the
scheduled backup, the backup will not be performed.
•
When using a NAS, make sure there is sufficient network bandwidth.
Editing a scheduled backup
1.
From the Scheduled Backup screen, select the backup you wish to edit.
2.
Click Edit.
3.
Edit the settings as desired.
4.
Click OK.
Deleting a scheduled backup
1.
From the Scheduled Backup screen, select the backup you wish to delete.
2.
Click Delete.
3.
Click Yes.
4.
Click OK.
90
PC Programming Manual