Panasonic KX-NS300 Pc Programming Manual page 487

Name
CO-CO with
DISA—Transfer
by DTMF "#"
(Activation Key
Required)
CO-CO with
DISA—Return to
DISA Top Menu
by DTMF "*"
Option 2
Name
DISA Cyclic Selects the cyclic tone
Tone detection mode.
Detection Cyclic tone detection
is used to determine
the end of a call for a
DISA trunk-to-trunk
conversation
established through
an analogue trunk.
This setting is only
available when DPS
cards are not
installed.
DISA Cyclic Specifies the
Tone maximum duration of
Option— the cyclic tone that will
Tone on be recognised by the
Maximum PBX. When the tone
Time (ms) sent from the
telephone company is
shorter than the value
set here, the PBX
recognises it as a
tone-on.
Note that this option
can only be set when
DISA Cyclic Tone
Detection on this
screen is set to
"Option".
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
Description
Specifies whether an outside
party such as a cellular phone
can transfer a trunk call to an
extension within the PBX by
dialling "#" + extension
number.
Enables a trunk caller to return
to the DISA top menu by
pressing " " while hearing a
ringback, reorder, or busy tone.
If disabled, retrying the call is
possible by pressing " ".
Description
Fixed: The number of times of a tone pattern
(a set of tone-on and tone-off) that the PBX
receives is fixed to 4 times in the ranges of:
Option: The tone pattern that the PBX
receives is optional as specified in DISA
Cyclic Tone Option on this screen.
10 × n (n=11–400) ms
Value Range
Disable: "#" is ignored if
dialled.
Enable (as "Flash"): The
current trunk call will be
placed on hold, then
transferred to the
extension whose number
is entered.
Disable, Enable
Value Range
A C C
B
D
, = 100–1300 ms,
90 ms
C
D D
= 90 ms, =
PC Programming Manual
Links
Links
487