Panasonic KX-NS300 Pc Programming Manual page 291

9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 1
9.30 PBX Configuration—[1-1] Configuration—Slot
—Card Property—E1 type MFC-R2 Setting 1
Name
ANI Service—Mode
ANI Service—ANI Max.
digits
MFC-R2 Timer—Forward
MFC-R2 Timer—Backward
MFC-R2 Timer—
Disappearance
Group-l Code Assignment—
ANI Start
Group-l Code Assignment—
ANI Complete (1)–(4)
Group-l Code Assignment—
ANI Reject
Group-l Code Assignment—
End of Digit
Group-l Code Assignment—
End of Digit Timer
Description
Selects the ANI (Automatic Number
Identification) service mode.
Specifies the maximum number of digits
to be received via ANI when receiving a
call with ANI.
Specifies the maximum time that the
PBX waits for an MFC-R2 forward
signal sent from the telephone
company.
Specifies the maximum time that the
PBX waits for an MFC-R2 backward
signal sent from the telephone
company.
Specifies the maximum time that the
PBX waits for an MFC-R2
disappearance signal sent from the
telephone company.
Specifies the code used to indicate the
beginning of an ANI number.
Specifies the code used to indicate the
end of an ANI number.
Specifies the code used to reject an ANI
number.
Specifies the code used to recognise
the end of each digit in an ANI number.
Specifies the length of time that the
PBX waits for further signal before
detecting the end of digit of an ANI
number.
Value Range
None: ANI service is
not activated.
Incoming call only:
Receives the caller's
number from the E1
line.
Outgoing call only:
Sends the caller's
number to the E1 line.
Both calls: Sends and
receives the caller's
number through the
E1 line.
None, 1–16
1–30 s
1–30 s
1–30 s
Undefined, 1–15
ANI Complete (1): 1–
15
ANI Complete (2)–(4):
Undefined, 1–15
1–15
Undefined, 1–15
1–15
PC Programming Manual
Links
291