Panasonic KX-NS300 Pc Programming Manual page 118

7.5.3 Utility—Report—UM View Reports
Item
Port No.
RTP Receive Packet Counter
RTP Receive Lost Packet Counter
RTP Receive Abandoned Packet Counter
RTP Arrive Packet Interval (MAX.) [ms]
RTP Arrive Packet Interval (MIN.) [ms]
To view IP extension information
1. From the Card Selection drop-down list, select the slot number for the card.
2. Click Execute.
The statistical information will be displayed.
3. Select an option:
•
Click Capture if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
2.
Click Save.
•
Click Clear to erase the information and reset the Collection Started Time.
4. Click Cancel to return to the main screen.
7.5.3 Utility—Report—UM View Reports
Unified Messaging (UM) system reports can be generated in order to monitor voice mail operations. Reports
can be displayed on a PC, printed, or exported.
This screen can be accessed only in On-line mode.
To view a report
1.
In the View Report tab, select the desired report from the Report Parameters drop-down list.
2.
Specify a range of mailbox numbers in the From and To boxes, or click Select all mailboxes.
3.
Click View Report.
Some reports can be viewed as a table or as a graph. For these reports, select "Table" or "Graph"
under View As before clicking View Report.
To export a report
A report can be printed from Web Maintenance Console or exported as a text file or CSV file.
1.
When viewing a report, select Print Out (PC), Text, or Comma-separated values (CSV) from the
drop-down menu.
2.
Click Export.
3.
If you select Print Out (PC):
A print command is sent to the PC. Follow any prompts to print the report.
If you select Text or Comma-separated values (CSV):
A file save dialogue is displayed. Specify the folder to export the report file to.
To clear a report
For each report, all data can be cleared. Follow the steps below to clear all report data. Some reports can
also be set to automatically clear at specified times.
118 PC Programming Manual
Description
Number of the port.
Total number of packets received.
Total number of packets lost.
Total number of packets abandoned.
Maximum time taken for a packet to arrive.
Minimum time taken for a packet to arrive.